Rockland Research Products
Cubic Multi-Anvil System with Press
Piston Cylinders System with Press
Walker Multi Anvil Module
Save Time Expendables and Prefabricated Sample Assemblies
If you want a quotation, after checking items below, press this button:
You will receive our email or FAX quotation within 5 business days
Piston-Cylinder Systems
You will need at least one pressure vessel. Check pressure vessel(s) desired:
1/2"- 35 kbar pressure vessel (complete)
3/4"- 20 kbar pressure vessel (complete)
1"- 15 kbar pressure vessel (complete)
You will require stack components. All vessels use the same stack array:
Stack components
Recommended to maintain system stability under experimental conditions:
Temperature controller
Pressure ramping and control system
Pressure holding system with isobaric quenching
You will require a press (larger size = greater flexibility):
150 ton hydraulic press
250 ton hydraulic press
Other (specify):
These items are needed to fabricate sample assemblies and to remove them after a run:
Enerpac 10 ton press/pump with accessories
Salt cell die set for pressing sample assemblies
Save time! Expendables and prefabricated sample assemblies
Walker Multi-Anvil High Pressure System
A complete system consists of the following:
Walker multi-anvil module. Specify 1" or 32 mm WC cubes:
Pressure control system
A press is required. Press with 1000 ton capacity is recommended.
1000 ton hydraulic press
600 ton hydraulic press
Expendables and other items: Additional set of eight WC cubes. Specify 1" or 32 mm:
Enerpac pump for rapid advancing and preloading
If you purchase a Walker multi-anvil system, you will also receive casting tools and instructions for fabricating sample assemblies; however, you can save time by purchasing prefabricated assemblies!
Cubic Multi-anvil System
Cubic multi-anvil module
Press:
1000 ton 600 ton Other (specify):
Save time! Prefabricated assemblies and heating elements:
Regular piston-cylinder sample assemblies 1/2" 3/4" 1"
Tapered piston-cylinder sample assemblies 3/4"
Multi-anvil sample octahedra 8 mm 12 mm (in stock)
Other: Specify size (2-18 mm):
LaCrO3 heaters Specify octahedron size (mm)
Complete multi-anvil assemblies (special order)
Please note: 100 minimum order on all expendable items
